close

Kategorier

More information

Spirit Flybarless System

Spirit Flybarless System

Kraftig FBL løsning som også støtter rescue.

Lagerstatus: På lager

kr 1 490,00
kr 1 490,00

Detaljer

Spirit is a device for stabilizing R/C models such as flybarless helicopters. Spirit features include electronic paddle simulation, vibration logging and support for various Tx/Rx types as well as a rudder gyro for those who want to continue using a mechanical flybar. Thanks to flybarless mechanics, the system improves efficiency and maneuverability of a helicopter and its stability while also extending flight times. 

Because Spirit uses the most advanced technology, your model can be controlled very precisely even under harsh conditions such as strong winds while maintaining a constant pirouette rate. 

The Spirit Flybarless System is perfect for pilots of all skill levels and all helicopter disciplines including use as a pure tail gyro on flybarred machines. With Stability Mode, the helicopter will return to an upright level attitude whenever the sticks are released or, with the flick of a switch, the helicopter will level and climb in either of two Rescue Modes.

Spirit accepts all current servo types including 1520us, 960us, and 760us at anywhere from 50Hz to 560Hz. All current swashplate variants are also supported. 

The machined, anodized aluminum case speaks to the quality of the product. With one of the smallest footprints available, the Spirit is a match for machines from 250mm to 800mm. 

With support for PWM, Futaba S-BUS, PPM, Spektrum DSM2/DSMX, Jeti EX Bus, and UDI/SRXL/SUMD, you can fly the Spirit Flybarless system with any current radio system. Spirit can be used for all electric or combustion powered helicopters. 

Features:
- Jeti DC/DS radio system integration & Wireless programming 
- Easy configuration with direct USB connection and setup wizard 
- Paddle mechanics support
- Paddle simulation
- Vibration Spectrum analysis for model diagnostics
- 32bit ARM processor a 6-axis MEMS sensor
- Flight log with events recorded
- Support for PWM, Futaba S-BUS,PPM, Spektrum DSM2/DSMX,Jeti Ex-BUS, SRXL/SUMD receivers
- 3 programmable banks allow for separate setups 
- Made in the Czech Republic

The Spirit can be updated anytime there is a change to the firmware. Adjustments can be made to the machines flight characteristics using the software and the profile can be saved to share or reload later. 

Technical specifications:
- Dimensions: 32mm x 26mm x 14mm 
- Supply Voltage: 3 - 15V (2S Li-Poly compatible)
- Maximum Roll & Pitch Speed: 2000°/s
- Maximum Tail Speed: 2000°/s (typical)
- Servo Frame Rate: 50Hz - 560Hz selectable
- Tail Servo Output: 1,52ms/0,96ms/0,76ms (narrow pulse) selectable
- Weight: 19g (without cable loom)

Included:
(1) Spirit Flybarless System
(3) Cables for Receiver Connection
(1) Mounting Tape
(1) Spirit USB Adapter

Tilleggsinformasjon

Bredde Nei
Høyde Nei
Lengde Nei

Produktomtaler

Skriv din egen omtale